July 26, 2012

HP Proliant ML350e Gen8 Server Series – high performance combined with flexible deployment options and scalability

By Databazaar Blog

HP Proliant ML350e Gen8 Server

The architecture of the HP Proliant ML350e Gen8 server allows for flexible deployment options as well as scalability. This dual processor tower server is based on Intel’s Xeon E5-2400 processor family which supports up to eight cores per processor. You can start with a single processor and based on the growing demands of your business you can add on another processor, more hard drives and more memory.

This server comes with six PCle expansion slots and ten USB ports; you can increase the memory to up to 192 GB. Hot-plug 3.5” as well 2.5” SATA/SAS drives are supported. You can have a maximum storage of 18 LFF or 24 SFF drives. HP’s Intelligent Provisioning enables a straightforward setup and configuration straight out of the box.

The embedded HP iLO4 (integrated Lights Out 4) simplifies server management and allows for remote operation as well. With HP’s Agentless Management system, you get built-in monitoring and alerts right from the time the server is turned on. The Active Health system provides continuous monitoring so you have a more stable system and therefore, less downtime. With remote management capability and automatic monitoring and alerts, you get big savings on IT support costs.

Summary

The architecture of the HP Proliant ML350e Gen8 server allows for flexible deployment options and scalability.
MSRP: Starts at $1,519

Manufacturer

Hewlett Packard

Specs that matter

Release Date:May 2012
Notable Features:Dual processor tower platform; Intel Xeon E5-2400 processor family; Smart Storage controllers and drives; iLO4 Remote Management Engine; High Efficiency power supply options; 6 PCle slots and 10 USB ports; Hot-swap drives
Processor:Intel Xeon E5-2400 product family; 1 or 2 processor
Maximum Memory:192 GB
Network Controller:1 Gigabit Ethernet NC361i 2 ports
Expansion Slots:6 PCle slots
Storage Controller:Smart Array B1 20i SATA RAID
Maximum Drive Bays:4 LFF SATA or 18 LFF SAS/SATA or 24 SFF SAS/SATA
Supported Drives:Non-hot plug 3.5” SATA; Hot-plug 3.5” SATA/SAS; Hot-plug 2.5” SATA/SAS
Warranty:3 years parts, 1 year labor, 1 year onsite

About Printer News
Your one stop source for information about new business- and consumer-class printers, Printer News covers everything you need to know. Well, almost everything. If you have anything to add to our report, please post it below.

Article Filed Under: HP Parts

Please Post a Comment

Name (required)
Email Address (required, but won’t be published)
Web Address (optional) Remember My Information
TypeKey/TypePad Login (Optional)

Subscription Center

Email

Library

Browse our Blog